Avanti J-26S XP Non-IVD Centrifuge, 50 Hz, 230 V

Product No:B14536

Redesigned to provide even more versatility and safety. Built upon standard-setting performance, including high speed, low heat output, imbalance tolerance and low noise, the J-26S XP’s vast range of separations only continues to grow. Above and beyond its BioSafety systems, this centrifuge has a more impact-resistant lid, full containment barrier and automatic rotor identification. Its ergonomic design--with lower instrument height and hands-free door operation--remains unchanged. The J-265 XP can process six liters of fermentor output in less than 10 minutes, deliver a subcellular fraction at 82,000 x g and run 24 microplates at a time. It automatically detects which rotor is installed and prevents the rotor from running above its maximum-rated speed, and enables quicker, quieter, more energy-efficient runs with better temperature control. The exclusive high-torque, switched reluctance (SR) drive shortens cycle times.

Product Specifications

Platform Avanti
Maximum Speed 26,000 rpm
Maximum g-Force 81800 x g
BioSafe Yes
Acceleration Maximum or Slow
Deceleration Maximum, slow, or off
Timed Run 1 minute-3 hours; Continuous Hold
Max Capacity Volume Range 1 - 6 L
Refrigeration System Non-CFC, non-ozone depleting refrigerant
Temperature Control ± 2 °C of set temperature after equilibration
Temperature Range(s) 10°C - 40°C in 1 degree increments
Rotor ID Automatic
Zonal Capability Yes
Pollution Degree 2
Environmental Conditions -10°C to 40°C in 1° increments
Material(s) Steel, Plastic
Finish Powder Coat Paint
Weight 290 kg(639.3 lb)
Width 71 cm(28 in)
Depth 86.0, 102.0 with air direviter extending cm(86.0, 102.0 with air direviter extending in)
Height 86 cm (149 cm with door open)
Clearances 7.6 cm (sides) & 16 cm (rear)
Humidity Restrictions < 95% (non-condensing)
Power Requirements 230 VAC, 50 Hz

Customers Also Viewed